Difference between revisions of "Shadowrun Combat System Version 5"

Revision as of 21:13, 12 August 2004

Hard Life: Shadowrun Combat System Version 5

Back to Rules

Introduction

The hard life combat system is designed to add more of a sense or realsim into the shadowrun combat system.  Primarily it introduces the following ideas

• Armour can stop attacks against
• Body can't be used to resist damage from Physical Attacks
• Attacks only do a certain amount of damage determined by their power and the accuracy of the attack (and not only by the skill of the user)
• Locations are introduced and attacks can scatter to different locations
• Autofire now no longer all hits or all misses meaning you can hit with partial bursts of autofire.

Hard Life and Lethallity

Is Hard Life more lethal? The answer is yes and no. Hard life balances the game for more experience characters with high skills as damage is no longer only skill based. It also gives characters with low body attributes more survivablilty as armour can now resist attacks (regardless of body). It is however more lethal in the fact that attacks that penetrate armour tend to do a lot of damage (even if the attacker has a low skill)

Ranged Combat#rangedcombat[[Anchor top}}

• Determine Range#determinerange
• Apply Situation Modifiers#sitmods
• Attack Test#attacktest
• Dodge Test#dodgetest
• Scatter#scatter
• Armour Test#armourtest
• Damage Test#damagetest
• Body Test#bodytest
• Taking Damage#takingdamage
• Death and Injury#death
• Stress Points#stress
• Melee Combat#melee
• Armour and Locations#armour
• Automatic fire and Scatter#automaticfire
• Suppression Fire#suppressionfire (Replaces existing rules in Cannon Companion)

Ranged Combat[[Anchor rangedcombat}}

^contents list#top

Determine Range[[Anchor determinerange}}

As per SR3.

^contents list#top

Apply Situation Modifiers[[Anchor sitmods}}

Consult the Ranged combat Modifiers Table (SR3 p. 112) and apply appropriate situation modifiers. The standard aim point is known as the default aim point and is shown on the hit location diagram (Figure 1). If the opponent wishes to choose a new aim point the attack is considered a called shot as per SR3.

^contents list#top

Attack Test[[Anchor attacktest}}

The attacker makes his Success Test using the appropriate combat skill or sorcery for a manipulation spell, modified by dice from the combat pool. Count the successes the attacker rolls.

^contents list#top

Dodge Test[[Anchor dodgetest}}

If the target wishes to attempt to dodge an attack, they may use their Combat against a target number of 4, with modifiers. Subtract the number of successes on the dodge from the Attack test. If there are more successes on the Dodge test than the Attack test, the attack is completely dodged (skip remaining combat steps).

Dr Faulks is being shot at be a security guard. The guard rolls 4 successes in his Attack test. Dr. Faulks rolls 2 successes on his Dodge test. The attacker has 2 net successes. If Dr Faulks had rolled 4 successes he would have completely dodge the attack.

Some addition modifiers for dodging are listed here.

Characters may try to dodge into cover at a lower target number. After dodging they are considered prone but are in cover from their attacker.

^contents list#top

Scatter[[Anchor scatter}}

To determine whether the attack scatters from the default aim point, consult Table 1. If the attack scatters roll a D6 and consult figure 1 to determine the direction of the scatter, 1 scatters up 2 up and right etc. Scatter for burst and auto-fire shots are determined differently (See Automatic Fire and Scatter). In large scale combats the GM may wish to ignore the scatter rules to save time.

Going back to Dr Faulks, the security guard got 2 net successes on the Attack test. That means the bullet scatters by 2 hexes from the default aim point on the torso. The guard rolls a 1 and a 3 on the Scatter roll. The bullet scatters up one hex and down and right one hex. It still hits on the torso location.

http://www.azrael-uk.f2s.com/az/shadowrun/S Rhitlocations 2.png

^contents list#top

Armour Test[[Anchor resistancetest}}

For attacks that do physical damage an Armour Test may be made to stage down the damage level. If the attack caused stun damage skip this step and go to the Body Test. Roll a number of dice equal to the Armour Value (Ballistic or Impact depending on the attack type) in that location. The target number for this test is Power of attack - Armour Value. Every two successes stage down the base damage code by one level. If the damage code is reduced below a light then the attack is stopped completely by the armour.

If the power of an attack is reduced to zero by the Armour Rating the attack is automatically blocked (This does not refer to the base power, but the total power including autofire). For example a 6L pistol shot to the torso will automaticcaly be blocked by a Vest with Plates (Ballistic Armour 6). If the attack is blocked the character still takes stun damage from the attack (See below).

Dermal Plate and Dermal Sheathing add extra dice to the Armour Test equal to their value, but do not alter the TN. Bone Lacing adds extra dice to the Armour Test and reduces the Power of the Attack.

If the attack is completely stopped by the armour the target must resist a stun attack with a damage equal to the base damage of the weapon using body (See Body Test) e.g. If a 10S Shotgun attack is blocked by armour then the target must then resist 10S Stun using body. The power of this attack is reduced by impact armour value.

Karma pool may not be used to reroll the Armour Test.

Sammy the Troll is is shot in the torso with a Ruger Super Warkawk heavy pistol (Damage code 10M). He is wearing a Vest with Plates (Ballistic Armour Value 6 in the chest) and has 1 point of natural dermal armour and 2 points Dermal Plate cyberware. He rolls 9 dice (6 Ballistic armour + 3 Levels of Dermal Plate against a target number of 4 (Power 10 - Ballistic Armour 6). He gets 5 successes. Every two successes stage the damage code down one level, the first two from Moderate to Light, and the next two from Light to Nothing. The attack is stopped by his armour but he must now resist a 10M Stun attack.

Against armour piercing attacks from APDS, APDU and damaging manipulations roll the full Armour Value but reduce the Power of the attack by half the Armour Value (Rounded down).

Cyber limbs roll 4 armour dice (but these dice do not reduce the power of the attack) automatically to resist damage. Each level of integrity enhancement increases the armour dice by 1. Cyber limb armour works just as normal armour. Cyberlimbs do not take stun damage.

^contents list#top

Damage Test[[Anchor damagetest}}

To determine the damage caused by an attack, roll a number of dice equal to half the power (rounded down) of the weapon (Target 4). The number of dice rolled is also modified by the accuracy of the Attack test (number of successes in the Attack test minus the number of successes in the Dodge test) by a number of dice as shown in Table 2. e.g. 1 net success only results in a partial success (the bullet just grazed him) but 4 successes is a complete success (it hit roughly where it was meant to) while 6 is an outstanding success (the bullet hit exactly on center mass for maximum damage potential).

When rolling damage choose one dice as a WILD dice (make it a different colour). If the Wild dice rolls a 6 then it counts as a success and the wild dice may be rolled again. If it is a six again then repeat the process. If the wild dice rolls a 1 then subtract one success.

Toxins, booby traps, electric fences, laser tip beams etc. or any other attack independant of a character also makes a damage test. e.g. If a character touches an electrical fence causing 10S Stun, the fence would roll 5 damage dice.

Dr Faulks has been hit by the Ares Predator in the chest the attacker now makes a Damage test. He rolls a number of dice equal to half the power of the weapon, which for the Ares Predator is 4, minus 2 dice because of his poor accuracy (4 successes on his Attack minus Dr. Faulks 2 successes on is Dodge test leave him with 2 net successes on the Attack test). That means looking at table 2, 2 dice are subtracted from the Damage test). Rolling 2 dice (one of which is a wild dice) he gets a 4 and a 6 on the wild dice. That’s 2 successes so far but the wild dice can be rerolled and this time it comes up a 4, another success, for a total of 3.

^contents list#top

Body Test[[Anchor bodytest}}

To resist stun attacks (either from melee, or from the effects of armour stopping bullets) the target rolls body against a target number of Power - Impact Armour Value in that location. Successes from this test subtract from the Damage Test successes. If the Damage Test successes are reduced to zero then every two successes after this stage down the damage code by a damage level.

Hurricane (Strength 5)lands a punch square on the chest of a security guard (Body 4, Impact Armour 3 in the torso). On his damage test he gets 6 successes. The security guard now rolls a Body Test using 4 dice against a target number of 2 (Power of Attack - Impact Armour Value). He gets 2 successes. This leaves 4 successes in Hurricanes favour which stages the damage up to a Deadly Stun!

The result of this test is also used for knock down. If the target gets no success on their body test they are knocked down. If they aren't knocked down they are knocked back 2 meters for a moderate and 3 for a serious. Characters who take deadly wounds are always knocked down.

^contents list#top

Taking Damage[[Anchor takingdamage}}

There are six locations for taking damage. The Head, Torso, Left Arm, Right Arm, Left Leg and Right Leg. Each location has its own condition monitor. Attacks that hit the head have the damage of the weapon staged up by one level.

When ever any location other than the torso takes damage, the torso also takes the same damage at one level lower. e.g. If the left arm takes a serious wound, the torso takes a moderate wound. This represents the shock, blood loss and trauma suffered. Damage does not transfer to the torso if the character has been shot in a location replaced by a cyberlimb. In the case of cyber limbs they make a resistance test with a body of 3. Cyberlimbs can have armour added and have their body increased though (see Man and Machine).

A character that is injured in multiple damage locations uses the torso or head injury (which ever is greater) level to calculate their initiative and target number modifiers. If they are using a limb that is injured, the target number modifiers for that limb are applied. A shot to a leg also reduces the characters qucikness (only for movement) by a number equal to the target number modifier.

Solitaire has been shot in her left arm for a Moderate wound and so takes a Light wound to the torso. When she used he right hand to shoot she doesn’t receive the +2 target number modifier from the Serious wound in her left arm, but does receive the +1 Target number for the wound to her torso. Solitaire then takes another hit to the torso taking her torso injury to a Serious level. Now when she tries to take any action (even with her less injured left arm) she receives a +3 target number modifier.

Area of effect attacks (e.g. grenades, area of effect manipulation spells), shotguns with shot rounds, and combat spells (e.g. Mana Bolt) cause damage equally to all locations e.g. if hit by a serious damage manabolt, a serious damage level is taken to all locations. In this instance the damage to the head is not staged up by one level, and also damage to limbs does not get transfered to the torso.

^contents list#top

Death and Injury[[Anchor death}}

A character is dead when their torso or head monitor reaches 10 boxes plus body in overflow damage as per SR3 rules.

If a characters limb reaches a deadly injury level the character can only use the limb after achieving one success on a willpower (2) test, modified by injury modifiers. If the limb reaches 10 boxes plus half body attribute in overflow it is incapacitated and can no longer be used. If a limb reaches 10 boxes plus body in overflow damage it is destroyer (rendered completely useless or blown/cut/shot/pulled off). The limb may not be healed and must me amputated and later can be replaced by transplant surgery.

Once any location reaches a deadly injury level (10 boxes) the location is severely bleeding. The location takes one additional box of damage every (Body Rating) combat turns. In addition if it is a limb which is on a deadly injury level, the torso also suffers one box of damage every (Body Rating) combat turns. Even after a limb has been completely destroyed by bleeding, the torso location still takes one box of damage from the bleeding every (Body Rating) combat turns, until the wound is treated.

Solitaire is having a really bad day. Her left arm takes another hit which puts it on a deadly injury level. She has a body of 4 and so every 4 combat turns her left arm takes another box of damage AND her torso location takes a box of damage from the bleeding. After eight combat turns her arm reaches 2 boxes of overflow and it is now incapacitated, she has also take 2 boxes of damage to her torso. After another eight combat turns her arm reaches 4 boxes or overflow and now has to be removed, and she also takes another 2 boxes of damage to her torso. Even tough her arm is now a bloody destroyed mess, she still takes a box of damage every 4 combat turns to her torso monitor.

^contents list#top

Stress Points (Modification of rules in Man and Machine [[Anchor stress}}

When a character takes a serious or deadly physical damage in a location they may suffer attribute, cyberware, or bioware failure. When a serious wound is sustained the character suffers 1D6-4 stress events. When a dealy wound is caused the character suffers 1D6-2 stress events. Each event is then rolled as per the rules in Man and Machine. Mental Attribute Stress can only occur if the character takes damaage to ther head location. Some cyberware and bioware only exists in certain locations (e.g. cybereyes) and if that particular system is rolled when determining damage then it is ignored.

^contents list#top

Melee Combat[[Anchor melee}}

Melee combat is resolved is a similar manner to ranged combat with the following changes. The resolve melee combat the attacker and defener roll the relavent melee skill (plus combat pool) with madifiers as per SR3. If the attacker rolls more successes than the defender then the attacker hits then scatter is determined and the a Damage Test is made modified by the acuracy of the attack. If the defender scores more successes than the defender hits then scatter is determined and the a Damage Test is made modified by the acuracy of the attack. If the attacker and defender both score the same number of successes the result is a stale mate with neither side causing any damage. The default aim point for melee combat is the same as in ranged combat (although the GM may change the default aim point for maneuvers like sweeps). Characters may however move the default aim point of the attack by one hex by spending (subtracting) one success from their attack test.

^contents list#top

Armour and Locations[[Anchor armour}}

The armour level of each location is different as shown in Table 7. For determining armour for area of effect attacks (e.g. grenades) and for determining armour effects on combat pool (SR3 p.285) use the average value.

Encumbrance Factor (Customised Armour Rules)

This number represents the awkwardness of the armour. For each two levels of encumbrance factor over the characters quickness the character suffers -1 on their combat pool. If multiple layers of armour are worn their encumbrance factors arm added. This effect can be removed if the Form Fitting Armour Option is selected for the armour. If multiple layers of armour are worn then for each point that the encumbrance factor exceeds the characters quickness that character suffers a +1 target number modifier on all quickness and dodge related tests and a -1 quickness modifier for movement purposes. This effect can be removed by taking the Custom Tailoring option is selected for the armour. Helmets do not count as layered armour.

^contents list#top

Automatic Fire and Scatter[[Anchor automaticfire}}

These rules replace those in SR3 for burst and full automatic fire. In this system it is possible to hit with partial bursts of automatic fire. Roll the ranged combat test with a base target number not modified for recoil.

Whisper shoots a 3 round burst with his Ingram Smart Gun. The burst causes two points of recoil (1 point for each shot after the first) but has recoil compensation of 2. Whispers target number is 4 so if he rolls a 4 all 3 rounds will hit.

For each round after the first, that is not compensated for by recoil compensation, add +1 (+2 for heavy weapons) to the target number and then consulting the same dice roll determine whether the each round hits individually, resolving each extra round one at a time.

Whisper shots 5 rounds on full auto with his Ingram and rolls a 4, 4, 4, 4, 5, 5 and a 6. The first three rounds recoil is compensated for and require a base target number of 4 to hit, for the 4th round to hit a 5 is required and for the 5th round to hit a 6 is required. Whisper hits with all five rounds.

When the target dodges his successes are taken from the attackers highest dice roll first.

The security guard Whisper just shot tries to dodge. He rolls one success. The means Whispers highest dice roll (the 6) is removed. Since Whispers next highest dice is a 5 he only hit with 4 bullets now.

When determining scatter for auto fire, use the following rules. If the attacker gets four or more successes the shot does not scatter. This is determined for each individual bullet. In the above example whisper obtained 4 successes with the first three rounds so they don’t scatter and would hit the default aim point. He only scored two successes for the 4th round, which means that bullet scatters two hexes (as per Table 2: Scatter). The location to which the attack scatters becomes the new aim point for determining further scatter. Resolve damage from auto fire for each location separately by adding up the total number of bullets that hit each location and making separate resistance tests. If different bullets have hit with different accuracies then use the lowest accuracy to determine damage. Damage for autofire is calculated as per SR3 but the first bullet doesn't add to power e.g. a 3 round burst is +2 power +1 damage level, a 10 round burst is +9 power and +3 damage levels.

Continuing from the above example after the guard dodges (removing Whispers highest dice roll of a 6). Whisper has 6 successes left against target number 4 and so the first 3 bullets hit the guard on the default aim point with 6 successes of accuracy to the torso. Whisper only has 2 successes against target number 5 which means the 4th bullet scatters by one hex. Whisper gets hit by 4 bullets in the torso and 1 in the left arm from a HK227 (Base damage 7M). His left arm takes a damage of 11S (+3 power and +1 damage level for 3 bullets) and his torso takes a damage of 7M (base power for one bullet). He then makes Resistance tests for the left arm and then the torso.

^contents list#top

Suppression Fire[[Anchor suppressionfire}} (Replaces existing rules in Cannon Companion)

Instead of firing accurately a character can make a suppression fire attack. When using suppression fire attacks the attacker chooses how many bullets will be fired into each 1 metre squared area. Each person in the area comes under attack from suppression fire.

Instead of rolling the normal skill roll the attacker rolls a number of dice equal to the number of bullets they are firing into each 1 metre squared area. Suppression fire has a base target number is determined by ranges (e.g. 4 for short, 5 for medium etc), this is modified by the attackers wound and vision modifiers and the targets cover. For each dice that is a success one bullet hits. The hit location of this round is rolled randomly on Table 5 using 3 dice. Roll 1D6 when the round hits to determine the number of successes in the Attack test. The target rolls a Dodge test and for each success dodges one bullet. Once dodge is resolved determine scatter for each round normally. Suppression fire lasts until the beginning of the characters next combat phase and attacks anybody who enter the area during that time.

Whisper is on the receiving end of Petes 6 rounds of suppression fire. Pete is at short range and has no injuries so rolls 6 dice against a target of 4. He gets 3 successes. He then rolls a D6 to determine how many attack successes each bullet hit with and gets a 1, 3, and a 5. Whisper now rolls to dodge. Three rounds hit so he rolls against a target of 5 (4 +1), and gets 2 successes. This means he dodged two of the bullets. For the remaining bullet 1D6 is rolled to determine the number of successes for the attack test. A 2 is rolled. he location is rolled randomly by 3D6 (getting a 5 – the right leg). he shot then scatters two hexes as only 2 the attack test only achieved two successes.

^contents list#top